How to use an oil-free air compressor mainly includes the following steps:
Check the equipment status: Before using the oil-free air compressor, first check whether the lubricating oil in the oil pool of the equipment is within the scale range to ensure that the oil volume is not lower than the scale line value. At the same time, check whether the moving parts are flexible, whether the connecting parts are tight, whether the lubrication system is normal, and whether the motor and electrical control equipment are safe and reliable.
Preparation before starting: Before starting for the first time after long-term disuse, it is necessary to check the wheel and pay attention to whether there are any collisions, jams or abnormal noises. The machine must be started under no-load conditions, and after the no-load operation is normal, the air compressor can be gradually put into load operation.
Precautions during operation: After normal operation, you should always pay attention to the readings of various instruments and adjust them at any time. Check whether the temperature of the motor is normal, whether the readings of each meter are within the specified range, whether the operating sounds of each machine part are normal, whether the suction valve cover is hot, and whether the sound of the valve is normal. In addition, it is necessary to check whether the various safety protection devices of the air compressor are reliable.
Maintenance: After the air compressor is operated for 2 hours, the oil and water in the oil-water separator, intercooler and aftercooler need to be discharged once. The oil and water in the air storage barrel are discharged once per shift to ensure the normal operation of the equipment and extend the service life.
Advantages of oil-free air compressor:
Oil-free design: The oil-free air compressor adopts an oil-free design to avoid the pollution of compressed air by lubricating oil, and is suitable for occasions with high requirements for air quality.
Efficient and reliable: Its core is the two-stage compression main engine. After twenty processes of fine processing, the rotor line shape reaches extremely high accuracy and durability. High-quality bearings and precision gears are installed inside to ensure the coaxiality of the rotor, thereby maintaining long-term, efficient and reliable operation.
