
Recently, TRION published two articles-"Which Scenarios Are More Suitable for Electric Heavy-Duty Trucks to Use Electric Drive Axle" and "How to Choose an Electric Drive Axle for Electric Heavy-Duty Trucks"-which attracted widespread attention from truck owners and industry professionals regarding heavy-duty e axle system solutions.
From the perspective of structure and operating principles, electric drive axles for heavy-duty trucks can be divided into three types: integrated, external-mounted, and distributed. What are the differences among these three configurations? How should users choose? And which solution is likely to become the mainstream development trend?
01 Integrated and External-Mounted Electric Drive Axles
The most distinctive feature of an external-mounted electric axle is its integral axle housing. The motor and transmission assembly is installed onto the axle housing through a flange interface. In appearance, the motor and transmission assembly looks as if it is "hung" on the axle, which is why it is referred to as an external-mounted design. In addition, the structure of the main reducer gear must also be adjusted accordingly, typically changing from a bevel gear to a helical gear.

External electric drive axle: The motor and gearbox assembly are connected to the axle housing via a flange.

The helical gears and differential of the externally mounted electric drive axle's main reduction gear.
The biggest issue with an external-mounted electric truck axle is eccentricity. The motor and transmission assembly acts like a cantilever beam, with its center of gravity offset from the wheel axis. When driving on rough or uneven roads, this configuration generates significant inertial forces, which can negatively affect the reliability of the motor and transmission. Due to installation space limitations in the middle of the frame, the transmission usually has only two gears, and motor power is relatively limited.

The center of gravity of the externally mounted electric drive axle is offset from the axle line.
"When power is insufficient, quantity makes up for it." The most direct way to increase the power of an e axle system is to externally mount assemblies on both the front and rear of the axle housing, using two motors and transmission assemblies to jointly drive the main reducer. At present, the peak power of a dual-motor external-mounted electric drive axle can reach up to 550 kW (approximately 748 horsepower). Its advantages include a relatively low cost and good maintainability, while its disadvantages are low integration, large size, and a limited number of gears.

Bosch integrated electric drive axle: highly integrated motor, multi-speed gearbox, final drive, and differential.
To address the issues of eccentricity, low integration, and large overall size associated with external-mounted electric drive axles, the integrated electric axle was developed. In this design, the axle is divided into three sections. The center section integrates the motor, multi-speed transmission, main reducer, and differential into a single unit, allowing it to fit within the available space in the middle of the frame. The left and right sections are castings designed to mount the wheel ends and braking systems. These three sections are connected via flanges.
The main advantages of an integrated truck drive axle are its high level of integration, compact structure, and availability of multiple gear ratios. Its main disadvantage is that it requires completely new development, resulting in a relatively higher cost.
02 Distributed Electric Drive Axle and Driving Strategy
The most notable feature of a distributed electric drive axle is the elimination of the mechanical differential. Instead, two motors independently drive the left and right wheels. When operating under harsh road conditions, the chassis control system dynamically adjusts the speed and torque of each wheel and can even reverse wheel rotation to achieve in-place turning. During cornering, the control system precisely calculates the speed and torque of each wheel based on parameters such as vehicle speed and steering angle-commonly referred to as an electronic differential-ensuring smooth turns while preventing oversteer or understeer.

The second axle of the Tesla Semi is a distributed drive axle.
In terms of appearance, a distributed electric axle typically has two motor and transmission assemblies mounted at the front and rear of the axle, making it look similar to a dual-motor external-mounted electric drive axle. The key difference is that the distributed design eliminates the mechanical differential. Currently, the second axle of the Tesla Semi electric heavy-duty truck adopts a distributed electric drive axle configuration. This solution relies heavily on advanced automotive electronics, linear chassis control systems, and intelligent driving technologies.

The Tesla Semi's three axles feature externally mounted drive axles (single motor).
At the 2024 Hannover Commercial Vehicle Show, TRION examined the two ev axle kits used on the Tesla Semi. The second axle is a distributed electric drive axle with two motors mounted at the front and rear and no shifting mechanism. The third axle is an external-mounted electric drive axle equipped with a single motor and a two-speed transmission. According to official information, the combined peak power of the three independent motors reaches 1,000 horsepower.
The driving strategy operates as follows:
During rapid acceleration, all three motors across the two drive axles operate simultaneously. With a total vehicle weight of 37 tons, the truck accelerates from 0 to 96.5 km/h in just 20 seconds.
Once the vehicle reaches 60 km/h, the two motors on the second axle (distributed electric drive axle) disengage, the clutch between the transmission and half-shaft is disconnected, and the motor on the third axle (external-mounted electric drive axle) handles high-speed cruising. Gear selection is automatically adjusted based on speed and road conditions.
When rapid acceleration or steep hill climbing is required, the two motors on the second axle immediately re-engage, enabling the vehicle to climb 5% gradients at speeds of 50–70 km/h.
During downhill driving, all three motors adjust regenerative braking levels according to road slope and vehicle speed, functioning as a retarder braking system.
Under this three-motor driving strategy, the vehicle achieves an energy consumption of approximately 1.24 kWh/km when cruising at 105 km/h with a total weight of 37 tons.
03 Outlook on Future Development Trends

Regarding the market trends for integrated, external-mounted, and distributed electric drive axles over the next five years, recent developments suggest a clear direction. Using integrated electric drive axles as an example, several manufacturers are transitioning from external-mounted designs to integrated solutions. In addition, companies such as Bosch have skipped external-mounted electric drive axles altogether and are focusing directly on the development of integrated electric drive axle products.
These developments indicate that integrated electric drive axle is likely to become the mainstream solution for electric heavy-duty trucks.
Distributed electric axle systems rely heavily on electronic differential technology and are currently suitable only for certain high-end, intelligent electric heavy-duty truck applications. They are unlikely to become mainstream in the short term. TRION believes that only with the full industrialization and widespread adoption of intelligent driving technologies in electric heavy-duty trucks will distributed electric drive axle solutions gradually gain broader acceptance.


